The shower has not enough hot water
- Adjust the thermostatic shower by removing and changing the position of the handle
- If the adjustment doesn't help then replace the thermostatic cartridge
- Kohler 78913 Thermostatic 3/4 inch Cartridge
|< Go Back||2016-06-25|
GROHE 33155 Europlus spray basin mono mixer - No water is coming from the tap when opened
- Replace 46374 35mm ceramic cartridge
|< Go Back||2014-08-29|
Grohe concealed cistern doesn't flush. The flush valve is an Old style EAU2 Flush valve 42774
- Pneumatic flush valve to be replaced. The replacement part is 42774
- The flush button gets stuck sometimes. The replacement part is: Grohe Chrome Dial Dual flush Air Button 38861000
|< Go Back||2013-10-18|
My shower and bath diverter thermostatic mixing valve is constntly leaking from the bath filler.
- The flow diverter cartridge is letting by and need replacement
- You need to isolate water before removing the cartridge
- You can order teh replacement part here: Grohe Aquadimmer Flow Cartridge 3000 47364000
|< Go Back||2013-08-03|
GROHE concealed toilet repair - the toilet doesn't flush and it seems like the cistern is not filling-in. The toilet we are talking about can be identified by filling valve position. It is inside the cistern on a left or right position clipped in with a grey plastic clip. To get access to the inside of the cistern remove the flush button cover by pulling it gently upwards. If there is no water in the cistern then touch the filling valve and see if it star filling. If it starts filling after you have touched it then the problem is in your filling valve. Check that the flush valve in the middle has a blue float box on the opposite side from your valve. If not then isolate the water supply to the cistern on the right or left and side inside the cistern there is a isolation valve . You will need a screwdriver to shut it off. Then disconnect the hose and pull the flush valve. Reassemble it so a blue box is on the opposite side from the filling valve. If it doesn't help then replace the filling valve and the grey bracket.
Filling Valve: The part number for replacement is 37095 000 and you can order it from here.
Bracket: The part number for replacement is 42246000 and you can order it from here.
|< Go Back||2013-04-20|
Grohe 20.03.44 flash valve is leaking water in to the toilet pan. Grohe replacement drop-valve item number 42 137. Is used in Ideal Standard cisterns and other makes. Overflow can be cut to length. Used with push button rod type. To replace the valve remove the boxing panels to have access to the concealed cistern. Isolate the water supply to the fill-in valve and remove the push button bellows assembly. Simply replace the valve and fit all back.
The part number is 27.05.44 and 20.03.44 and you can order it from here.
|< Go Back||2013-04-03|
Shower Grohe_Auto_2000 is hot only for a minute and then temperature starts fluctuating. It could be that the problem coming from the boiler especially if its a combination boiler. To check that open any other hot tap in the property and check the performance. If its similar then boiler need attention and you should call a gas safe registered engineer. Otherwise if the problem occurs only in the shower then Grohe thermostatic 3/4" cartridge assembly need replacement. The part number is 47310 000 and you can order it from here. To replace this part you don't need a gas engineer.
Shower valve Grohe Auto 2000 manual: PDF
|< Go Back||2013-03-20|