Neff T2113N2EU 8101/0561 - sparking doesn't stop after lighting. Piezo igniter lights every time, but keeps on sparking until I do a couple of clicks on another ring. It's all the same with knobs. If it's a single switch that this happens with then this could be as simple as a spillage getting into the switch or it could be a faulty switch or spark generator. Isolate the electricity supply and take the top off the hob to reveal the switches. Try cleaning the switch with switch cleaner (available from maplins and the like), allow it to dry, then reassemble and try again. If this doesn't cure the fault, I'd suggest that the switch was faulty. If this happens with every switch, then it's more likely to be the spark generator at fault. Unfortunately without the full model number I'm unable to determine which type of switch is fitted to your appliance. If you can get the full model number I can give you some more detail.
The part number for replacement is RS47303 and you can order it from here.
|< Go Back||2013-04-09|